The customer Viker from Uzbekistan comes to our factory, and visiting the 50 TPD sunflower seed oil producing line.
The brief introduction about the soybean oil processing line:
Cleaning: In order to obtain high effective cleaning,ensure good work condition and production stability, high efficient vibration screen was used in the process to separate big and small impurity. Suction type gravity stoner removing machine was applied to remove the shoulder stone and earth, and magnetic separation equipment without power and exhaust system were used to remove iron. Dust removing wind net is installed.
Crush:In order to ensure good softening and flaking effect, soy is generally broken up uniformly to 5~6 flakes and water distribute uniformly during softening, and flakes is thin and burliness.
Flaking:Flaking means a certainty granularity of soy lamella was prepared for flaked of about 0.3 mm, the oil of raw material can be extracted in the shortest time and maximum, and residual oil was less than 1%.
Drying process:The puffed soybean contains about 12% water,and the best moisture for leaching process is 7-9%,therefore, there must be effective drying means to achieve the best leaching moisture. Adopting counter-current dryer can make water and temperature meet with follow-up process requirements, a nd improve the oil yield, as well as oil quality.